Having a swimming pool at home is indeed fun, but as a consequence, you’ll need to manage it routinely so that it can always look clean and fresh. Pool water, floors, pool walls, and the surrounding area need to be kept clean and healthy.
The floor around the pool should be diligent in using a cleaning liquid that also functions as a disinfectant, such as Wipol, to ensure it is free of bacteria. Pool water requires regular care to keep the levels balanced so as not to cause skin and eye irritation.
Cleaning Using Chemicals
The use of chemicals is commonly used as a way to purify pool water, so you should know what ingredients are needed and how often it needs to be used. Chemicals below are commonly used to treat pool water.
Chlorine
The way to purify swimming pool water is practical thanks to this material. Chlorine functions to bind dirt in the water so that the water remains clean. Chlorine can be obtained in tablet, liquid or granular form. Tablet chlorine is often an option because its solubility is low so chlorine is released little by little and lasts longer. Chlorine should be put into the pool water in the afternoon when the sun is not hot or at night because the sun’s heat can reduce chlorine levels. Treatment with high chlorine products or shock treatments is also needed once a week.
Cyanuric acid
This chemical is needed to balance the pH in the water so that chlorine functions optimally to purify water. The recommended water pH is between 7.2-7.8. Cyanuric Acid is usually contained in chlorine tablets, but if not, you need to add it separately.
Algaecide
This material is a surfactant material that functions to prevent moss in the pool. Usually, Algaecide is added to the pool the day after the shock treatment. Make sure you also check the water in the pool regularly using special water check tools twice a week.
The goal is that water treatment ingredients can work optimally, to determine the dosage of the necessary care ingredients, and to prevent skin and eye irritation which usually occurs because the pH level of the water is too high or too low. Here are what you need to check and recommended levels:
- Chlorine – normal levels 1-3 ppm
- Cyanuric Acid – normal levels 40-100
- Alkalinity – normal levels 80-120 ppm
- pH- normal levels 7.2 – 7.6
Remember always to read the label on the package so you can use it according to the instructions and dosage. There are many brands of pool water treatment products, but usually, the active ingredients are the same. What distinguishes brands of pool cleaning products is the level of the active ingredients, so once again pay attention to the label before buying it.…